The restoration of RT8

OK not going to be a great deal I can write this month as almost all of the work has taken place in the cab, equally the photos won't be the greatest either as its not the easiest place in the world to photograph! Above can obviously be seen the front panel that is now fitted along with side light and headlight mounting.

Well I had to put my tea down somewhere! All the floor has been replaced with original RT parts as the floor on RT8 was as rotten as the proverbial pear. New rubbers have been mounted around the floor and everything has been cleaned and modified to fit.

As can be seen the original flag unit has been restored and repainted and is now mounted back in position as have the front screens. The steering wheel has been recoated and is back with us and will be one of the last things to go back in.

Looking in from the emergency window you can get a better view of the rubbers that have gone down on the floor, the restored hand brake area and the mounting where on later RT's the indicator switch went but on the 2RT2 an antiquated horn is fitted.


Again taken from the emergency window you can see the winding handles that allow the driver to open the front windows and get some air. These were all seized solid and are made up of a spring and bicycle chain like mechanism. Eventually one was freed off enough to allow us to get it all out repaired, re-fitted and working, it is 'small' detailed jobs like this that don't look much but that take up so much time. This month is going to be all about finishing the cab to the point that everything is painted and fitted permanently, then perhaps we can move on to somewhere easier to photograph... until then cheers!